Complete 8-Gauge Car Amplifier Wiring Kit Included
One of the biggest advantages of the BOSS Audio R1100MK bundle is the included installation wiring.
Rather than sourcing every cable and connector individually, the package provides many of the essential components needed for a conventional amplifier installation.
Included Wiring and Installation Accessories
| Component | Included Quantity |
|---|---|
| Red Power Cable | 20 ft, 8 Gauge |
| Black Ground Cable | 3 ft, 8 Gauge |
| Blue Remote Turn-On Wire | 16 ft, 18 Gauge |
| Speaker Wire | 30 ft |
| Blue RCA Interconnect Cable | 20 ft |
| Inline AGU Fuse Holder | 1 |
| AGU Fuse | Included |
| Ring Terminals | 10 assorted, 5/16″ and 1/4″ |
| Split Loom Tubing | 6 ft |
| Rubber Grommets | 3 |
| Wire Ties | 20, 4-inch |
Why an Amplifier Wiring Kit Matters
Correct amplifier wiring helps provide reliable electrical power, reduce unwanted noise, and protect the vehicle’s electrical system.
The included 8-gauge power cable connects the amplifier to the vehicle’s battery through an appropriately rated fuse.
Use our Honda Civic Stereo Wiring Diagram to help identify factory radio and speaker connections before integrating an aftermarket amplifier.
The ground cable provides the amplifier’s return path, while the remote turn-on wire allows a compatible stereo to control amplifier operation.
The included RCA cable carries the low-level audio signal from a compatible aftermarket head unit.
Important: Verify the wiring kit’s conductor material, actual conductor size, current capacity, and fuse rating before installation. Cable length and electrical demand determine whether 8-gauge wiring is suitable for a particular setup.
Class A/B Amplification with MOSFET Power Supply
The BOSS R1100MK uses Class A/B amplifier technology, combining traditional analog output operation with a MOSFET power supply.
This design provides dedicated low-frequency amplification for compatible subwoofer systems.
Its single-channel architecture makes it suitable for installations where a separate amplifier powers the subwoofer while the factory radio or another amplifier handles the vehicle’s main speakers.
Proper mounting, ventilation, and electrical wiring are important for maintaining reliable performance.
Variable Low-Pass Crossover for Cleaner Bass
The adjustable low-pass crossover allows you to control the upper-frequency range reproduced by your subwoofer.
This helps the subwoofer blend with your factory door speakers or aftermarket component speakers.
For many installations, approximately 80 Hz provides a useful starting point for crossover adjustment.
Final settings should depend on the subwoofer enclosure, speaker capabilities, and vehicle acoustics.
Switchable Bass Boost and Remote Subwoofer Control
The BOSS R1100MK includes switchable bass boost for additional low-frequency emphasis.
When configured correctly, bass boost can change the character of your subwoofer’s output.
Planning a Nissan Altima bass upgrade? Reference our Nissan Altima Stereo Wiring Diagram to help identify the correct factory stereo and speaker connections.
The included remote subwoofer level controller provides convenient adjustment without reaching the amplifier itself.
For cleaner sound and better speaker protection, begin with bass boost disabled and set amplifier gain correctly before increasing bass emphasis.
Compatible with Factory and Aftermarket Car Stereos
The R1100MK is designed to work with compatible factory and aftermarket car audio systems.
Aftermarket Head Unit Installation
If your aftermarket stereo includes RCA preamp outputs, the included 20-foot RCA cable can connect the head unit to the amplifier.
The remote turn-on wire can also connect to a compatible amplifier turn-on output.
Factory Stereo Subwoofer Upgrade
Drivers retaining their factory radio may be able to use the amplifier’s high-level input connections to integrate an aftermarket subwoofer.
Depending on the vehicle’s audio architecture, a line output converter or factory amplifier integration interface may be required.
The supplied RCA cable is intended for low-level signal connections and should not be connected directly to unconverted speaker outputs.
Compact Design for Flexible Installation
The BOSS Audio R1100MK amplifier measures approximately 9.13 × 10.44 × 2.25 inches and weighs 4.43 pounds.
Its compact chassis makes it suitable for many trunk-mounted amplifier installations and custom audio panels.
The included split loom, rubber grommets, and wire ties help installers route and protect wiring through the vehicle.
Always secure the amplifier and cables away from moving components, sharp edges, and excessive heat.
Visit My Pro Street Online for additional car stereo installation tutorials, factory speaker wiring diagrams, and DIY automotive electrical resources.
BOSS Audio R1100MK Technical Specifications
| Specification | Details |
|---|---|
| Brand | BOSS Audio Systems |
| Model | R1100MK |
| Product Type | Monoblock Amplifier and Wiring Kit |
| Amplifier Class | Class A/B |
| Maximum Power at 2 Ohms | 1100W × 1 |
| Maximum Power at 4 Ohms | 550W × 1 |
| Speaker Impedance | 2–8 Ohms |
| Power Supply | MOSFET |
| Frequency Response | 9 Hz–50 kHz |
| Signal-to-Noise Ratio | 102 dB |
| THD at RMS Output | 0.01% (advertised) |
| Low-Pass Crossover | Variable |
| Bass Boost | Switchable |
| Remote Subwoofer Control | Included |
| Amplifier Fuse | 1 × 30A ATO Blade |
| Power Cable | 20 ft, 8 Gauge |
| Ground Cable | 3 ft, 8 Gauge |
| RCA Interconnect | 20 ft |
| Speaker Wire | 30 ft |
| Dimensions | 9.13 × 10.44 × 2.25 in |
| Weight | 4.43 lbs |
| Warranty | Advertised 6-Year Platinum Online Dealer Warranty; eligibility and terms apply |
Installation Tips for the BOSS R1100MK Amplifier Kit
Before installing your new amplifier, disconnect the vehicle’s negative battery terminal and identify a suitable amplifier mounting location.
Route the 8-gauge power cable from the battery through a protected firewall opening, using a rubber grommet where necessary.
Install the included fuse holder close to the battery and verify that the fuse is correctly rated for the cable and installation.
Connect the ground cable to an appropriate clean, secure chassis grounding point.
Route the RCA signal cable and remote turn-on wire from the head unit to the amplifier, then connect your compatible subwoofer using the supplied speaker wire.
Verify the final speaker impedance before powering the amplifier.
Once installed, adjust the amplifier gain and low-pass crossover for clean bass reproduction.
Pro Street Installation Tip: The amplifier’s internal 30-amp fuse does not replace the need for properly installed battery-side circuit protection. Never increase a fuse rating simply to accommodate the amplifier’s advertised peak wattage.
Why Choose the BOSS Audio R1100MK Amplifier and Wiring Kit?
The BOSS Audio R1100MK offers a convenient solution for drivers who want to install an aftermarket subwoofer without sourcing every basic installation component separately.
Its combination of dedicated monoblock amplification, adjustable bass controls, remote subwoofer level adjustment, and an included wiring kit makes it particularly useful for first-time car audio upgrades.
Whether you’re upgrading a daily driver, installing a subwoofer in a project car, or replacing an older amplifier, this bundle provides many of the components needed to get started.
Upgrade Your Car Audio with Pro Street Online
Ready to bring deeper bass to your vehicle?
The BOSS Audio Systems R1100MK 1100W Monoblock Amplifier and 8-Gauge Wiring Kit combines dedicated subwoofer amplification with power wiring, RCA interconnects, speaker cable, and installation accessories in one convenient package.
Explore more aftermarket stereos, subwoofer amplifiers, speakers, and car audio installation accessories at Pro Street Online.
There are no reviews yet.