Designed for Cars and Motorcycles
The spray can be used as a quick exterior protectant after routine washing.
Potential automotive surfaces include:
- Clear-coated paint
- Compatible chrome
- Painted metal
- Exterior fiberglass
- Approved plastic trim
- Motorcycle body panels
- Previously coated paint
Confirm compatibility before applying it to matte paint, vinyl wraps, paint-protection film, uncoated plastic or polished bare metal.
For proper surface preparation, read our guide explaining how to wax a car and why clean paint matters before applying protection.
Ceramic Spray Wax for RV Fiberglass
Large fiberglass RV panels are time-consuming to protect with traditional wax. The hose-attached application makes this product particularly useful for campers, travel trailers and motorhomes.
It may help protect exterior fiberglass against:
- UV exposure
- Rain and moisture
- Dirt accumulation
- Environmental stains
- Road grime
- Light oxidation development
It will not remove existing chalky oxidation. Heavily oxidized fiberglass should be cleaned and polished before protection is applied. Coating oxidized material simply makes the oxidation more water-repellent, which was probably not the restoration plan.
Suitable for Boats
The spray can also provide hydrophobic protection on compatible marine exterior surfaces.
Potential applications include:
- Gelcoat
- Painted hull surfaces
- Fiberglass panels
- Exterior trim
- Compatible metal finishes
Do not apply it to walking surfaces, steps, handholds, seats or control areas where increased slickness could create a safety hazard.
Marine surfaces exposed to saltwater should be rinsed thoroughly before and after application.
Does It Replace a Professional Ceramic Coating?
No. A spray-and-rinse product is designed for convenience and routine protection.
A professional ceramic coating generally requires:
- Chemical decontamination
- Clay treatment
- Paint correction
- Solvent preparation
- Controlled application
- Leveling and curing
This spray is better suited to drivers who want easier application and short-term hydrophobic performance without spending an entire weekend preparing the paint.
If the surface feels rough after washing, use the steps in The Truth About Clay Bars before adding protection.
How to Get Better Results
Start With a Proper Wash
Remove dirt, road film and previous loose residue before application. Browse Pro Street Online’s car-cleaning kits for compatible wash supplies.
Work Out of Direct Sunlight
Apply the product to cool panels in a shaded area. Hot surfaces can cause uneven drying and streaks.
Treat One Section at a Time
On large RVs and boats, divide the surface into manageable sections. Do not coat the entire vehicle and then begin looking for the rinse hose.
Rinse Thoroughly
Remove excess product from panel gaps, emblems, trim edges and exterior hardware.
Dry Immediately
Use a clean microfiber drying towel to prevent mineral spotting and remove remaining residue.
Where Not to Use It
Unless specifically approved by the product label, avoid applying it to:
- Windshields
- Motorcycle windscreens
- Fabric convertible tops
- Tires
- Brake components
- Floors and walking surfaces
- Steering controls
- Boat decks
- Matte finishes
- Heavily oxidized fiberglass
- Hot surfaces
Overspray should be rinsed away immediately.
Product Specifications
| Specification | Details |
|---|---|
| Product type | Hose-attach ceramic coating spray |
| Container size | 32 fluid ounces |
| Application | Spray, rinse and dry |
| Primary benefit | Hydrophobic surface protection |
| Finish | Glossy and smooth |
| Vehicle applications | Cars, trucks, RVs, boats and motorcycles |
| Compatible materials | Approved paint, clear coat, fiberglass and gelcoat |
| Equipment required | Garden hose and microfiber drying towel |
| Buffing required | No traditional buffing |
| Surface preparation | Wash and rinse before application |
| Brand | Not provided |
| Published durability | Not provided |
Final Verdict
The 32-ounce Ceramic Coating Spray provides a quick way to add gloss and water-repelling protection to cars, RVs, boats and motorcycles. Its hose-attached dispenser is especially useful for large fiberglass vehicles where hand-applying conventional wax becomes a full-body workout.
Its biggest strengths are speed and coverage. Its limitations are equally straightforward: it will not correct paint, remove oxidation or match the durability of a professionally installed ceramic coating. Apply it to a properly cleaned surface, rinse thoroughly and dry immediately for the best result.
There are no reviews yet.