GReddy 17060060 GRacer Front Lip Spoiler – 2013–2016 Subaru BRZ ZC6

GReddy 17060060 Product Specifications

Vehicle Fitment – What Does GReddy 17060060 Fit?

This includes compatible original-bumper BRZ Premium, Limited, and applicable special-edition vehicles.

Important fitment information: GReddy identifies the part for BRZ applied models A through D, corresponding to the original pre-facelift bumper.

The 2017–2020 Subaru BRZ received revised front-end styling. Do not assume this lip fits those vehicles without confirming the bumper configuration.

Likewise, the Scion FR-S and Toyota 86 have different front bumper designs and use separate GReddy front lip applications.

A Clean Alternative to a Full Widebody Kit

The Subaru BRZ is one of the most popular platforms for aggressive exterior customization.

Widebody conversions, large splitters, vented fenders, and aftermarket bumpers can dramatically change the vehicle’s appearance.

But not every enthusiast wants to modify factory body panels or sacrifice the original BRZ styling.

The GReddy GRacer front lip takes a more restrained approach.

It adds a pronounced lower edge to the factory bumper while maintaining the overall shape of the original front fascia.

For a look at how far this platform’s exterior styling can be taken, our coverage of GReddy’s Rocket Bunny FR-S at SEMA highlights the aggressive Japanese aero movement that helped popularize the FR-S and BRZ among aftermarket enthusiasts.

The GRacer lip offers a simpler option for owners who prefer a clean, factory-inspired appearance.

Does the GReddy Front Lip Improve Aerodynamics?

A front lip changes the shape of the lower bumper, potentially influencing how air approaches the underside of the car.

GReddy describes its GRacer front spoilers as designed to manage underbody airflow and help guide air toward cooling areas.

However, the manufacturer does not publish a verified downforce measurement, drag coefficient improvement, or lap-time reduction for part number 17060060.

For most BRZ owners, the main benefit is its improved appearance and lower front-end profile.

If you’re building a track-focused car, remember that a complete aerodynamic package involves more than a front lip alone.

Ride height, underbody airflow, suspension setup, rear aero, and cooling requirements all influence the finished vehicle.

Why Hard Urethane Is a Good Choice for a BRZ Front Lip

A front lip is positioned close to the pavement, making it vulnerable to parking stops, steep driveways, road debris, and uneven pavement.

GReddy uses hard urethane to provide a combination of shape retention and flexibility.

Compared with many rigid fiberglass components, urethane can better tolerate some minor deformation without immediately cracking.

However, hard urethane is not indestructible.

Repeated scraping, improper mounting, or a substantial impact can still damage the spoiler or the original bumper.

Owners who regularly drive on uneven roads should evaluate ground clearance before installation.

Pairing the GReddy Front Lip With Suspension Upgrades

One of the most effective ways to improve the BRZ’s appearance is to combine well-chosen exterior styling with a properly adjusted suspension.

A modest ride-height reduction can reduce wheel gap and complement the GReddy front lip’s lower profile.

But lowering the car also reduces available clearance.

The GReddy 17060060 already extends approximately 17mm below the factory bumper, so combining it with aggressive lowering springs or coilovers can make steep driveways and parking blocks more challenging.

Our BRZ Adjustable Coilover Suspension Kit Guide explains how ride height, suspension adjustment, and chassis balance affect both appearance and everyday usability.

For a street-driven BRZ, proper suspension setup should preserve enough travel and ground clearance to avoid unnecessary damage.

Installation Considerations

The GReddy 17060060 is designed for the original Subaru BRZ ZC6 front bumper.

Before installation, inspect the factory bumper for cracks, previous repairs, or aftermarket modifications that may affect fitment.

Test-fit the front lip and check that both corners align evenly.

Use the supplied mounting hardware and follow GReddy’s installation instructions.

If you plan to paint the spoiler, use preparation products and coatings suitable for flexible urethane body components.

After installation, inspect the attachment points and verify that the lip clears the pavement during normal driving.

Avoid relying on adhesive or improvised hardware in place of the manufacturer’s specified mounting method.

Frequently Asked Questions

Does GReddy 17060060 fit a 2013 Subaru BRZ?

Yes. The 2013 Subaru BRZ with its original factory bumper is a confirmed application.

Does it fit a 2015 Subaru BRZ Limited?

Yes, provided the vehicle retains the compatible original front bumper.

Does it fit a 2016 Subaru BRZ?

Yes. GReddy lists the pre-facelift BRZ ZC6 through the applicable 2016 production period.

Will it fit a 2017 Subaru BRZ?

Fitment is not confirmed by GReddy for the revised 2017 front bumper. Verify compatibility before ordering.

Does this fit a Scion FR-S?

Not as a manufacturer-confirmed direct-fit application. GReddy offers part number 17010098 for the original Scion FR-S bumper.

Is the GReddy 17060060 painted?

No. It is supplied unpainted.

How much lower does the front lip extend?

Approximately 17mm below the original bumper.

Does it increase horsepower?

No. This is an exterior aerodynamic styling component, not an engine or exhaust performance modification.

Is installation hardware included?

GReddy retailers list the necessary mounting hardware as included. Verify the package contents before beginning installation.

Upgrade Your Subaru BRZ With Genuine GReddy GRacer Styling

The GReddy 17060060 GRacer Front Lip Spoiler offers a clean way to enhance the appearance of your 2013–2016 Subaru BRZ.

Its durable hard-urethane construction, factory-bumper-specific design, and approximately 17mm lower profile make it a strong choice for enthusiasts who want authentic Japanese styling without replacing the complete front bumper.

Give your first-generation Subaru BRZ a more aggressive stance with the GReddy 17060060 GRacer Front Lip Spoiler.