Standard 2-Inch Class III Receiver
The hitch features a standard 2-inch square receiver opening, one of the most versatile sizes for aftermarket towing and cargo accessories.
This allows owners to install compatible receiver-mounted equipment without purchasing an entirely different hitch assembly for each application.
Potential accessories include:
-
Trailer ball mounts.
-
Hitch-mounted bicycle racks.
-
Cargo carriers.
-
Spare tire carriers.
-
Receiver-mounted steps.
-
Compatible utility attachments.
The 2-inch receiver also provides a wider selection of accessory options than smaller 1.25-inch receiver systems.
However, not every accessory that fits a 2-inch receiver is appropriate for the Mazda CX-5. Always verify accessory weight, tongue weight, clearance, and the vehicle manufacturer’s limitations.
Advertised 4,000 lb Gross Trailer Weight Rating
The manufacturer rates this hitch assembly for a maximum gross trailer weight of 4,000 pounds.
This rating describes the hitch’s advertised weight-carrying capacity under its specified conditions.
It does not mean every Mazda CX-5 can tow 4,000 pounds.
The allowable trailer weight must never exceed the lowest applicable rating among the vehicle, receiver hitch, ball mount, hitch ball, and other towing components.
Consult the Mazda owner’s manual for the exact towing capacity of your vehicle’s model year and configuration.
Advertised 600 lb Tongue Weight Rating
The hitch also carries a manufacturer-advertised maximum tongue weight rating of 600 pounds.
Tongue weight is the downward force applied by a trailer coupler or receiver-mounted accessory.
This rating is particularly relevant when selecting hitch-mounted cargo carriers and bicycle racks.
Even if the hitch is rated for 600 pounds, the Mazda CX-5’s allowable tongue load may be considerably lower.
For accessories that extend behind the receiver, leverage and accessory-specific restrictions can further reduce the permissible load.
Heavy-Duty Q235B Steel Construction
This Class III Mazda CX-5 hitch is manufactured from Q235B steel, a structural carbon steel grade commonly used in fabricated metal components.
The steel construction provides a rigid receiver assembly intended to withstand the mechanical loads associated with properly rated towing and hauling applications.
Construction highlights include:
-
Heavy-duty Q235B steel.
-
Standard 2-inch square receiver.
-
Vehicle-specific mounting configuration.
-
Black e-coated surface.
-
Additional powder-coated finish.
-
Bolt-on installation.
-
Manufacturer-advertised Class III designation.
Actual performance depends on manufacturing quality, weld integrity, installation, and adherence to the applicable load ratings.
Dual-Layer E-Coated and Powder-Coated Finish
Trailer hitches are exposed to road spray, dirt, moisture, and changing weather conditions.
This Mazda CX-5 receiver hitch features a black electrocoat (e-coat) layer and powder-coated exterior finish.
The combination is designed to help protect exposed metal against corrosion and environmental wear.
The black finish also provides a discreet appearance beneath the rear bumper.
For long-term durability, inspect the coating regularly, especially around mounting hardware, receiver edges, and areas exposed to road debris.
Bolt-On Installation Without Welding
The hitch is designed to attach to compatible Mazda CX-5 mounting locations using supplied hardware.
No welding is required according to the manufacturer.
The supplied description specifies 86 ft-lbs of torque for M12 mounting hardware.
Always confirm this torque value against the installation instructions for the exact hitch model and supplied bolt grade before tightening. Do not apply it to other fastener sizes.
The product description indicates that the hitch assembly and installation accessories are included.
For more maintenance and installation information, visit My Pro Street Online automotive technical guides.
Mazda CX-5 Class III Trailer Hitch Specifications
| Specification | Details |
|---|---|
| Product type | Class III trailer hitch receiver |
| Vehicle application | Mazda CX-5 |
| Advertised model years | 2013–2025 |
| Engine compatibility | Gasoline models |
| Excluded models | Diesel-equipped CX-5 |
| Receiver size | 2 inches |
| Material | Q235B steel |
| Finish | Black e-coat and powder coat |
| Maximum advertised GTW | 4,000 lbs |
| Maximum advertised tongue weight | 600 lbs |
| Installation | Bolt-on |
| Welding required | No |
| Specified M12 hardware torque | 86 ft-lbs, subject to instruction verification |
| Included components | Hitch assembly and installation accessories |
| Trailer wiring harness | Not specified as included |
| Hitch ball and ball mount | Not specified as included |
The 4,000 lb GTW and 600 lb tongue weight figures are advertised hitch ratings. Vehicle towing and tongue weight limits may be substantially lower.
Mazda CX-5 Trailer Hitch Fitment Guide
| Mazda CX-5 Model Years | Advertised Fitment |
|---|---|
| 2013–2016 | Gasoline models |
| 2017–2021 | Gasoline models |
| 2022–2025 | Gasoline models |
| Diesel models | Excluded |
| Mazda CX-50 | Not confirmed |
| Mazda CX-30 | Not confirmed |
| Mazda CX-9 | Not confirmed |
This hitch is intended for the CX-5 and should not be assumed interchangeable with other Mazda SUVs.
What Can You Use a Mazda CX-5 2-Inch Hitch For?
Hitch-Mounted Bike Racks
One of the most popular reasons to install a receiver hitch on a compact SUV is to carry bicycles.
A compatible 2-inch hitch-mounted bike rack can provide convenient access to bicycles without installing a roof-mounted carrier.
Before loading, verify the combined weight of the rack and bicycles, the vehicle’s allowable tongue load, and the rack manufacturer’s requirements.
Cargo Carriers
A hitch-mounted cargo carrier can provide additional storage space for luggage, camping equipment, and other appropriately sized items.
Keep in mind that the weight of the carrier itself counts toward the tongue load.
The cargo platform’s distance behind the receiver also affects leverage and vehicle handling.
Small Utility Trailers
A compatible trailer ball mount and wiring harness can allow an appropriately equipped Mazda CX-5 to tow within the vehicle manufacturer’s published limits.
Always verify the trailer’s loaded weight, tongue weight, and applicable vehicle specifications.
Outdoor Recreation
The receiver can support compatible accessories for camping, cycling, and other outdoor activities.
Its standard 2-inch opening makes it easier to find accessories than a less common proprietary mounting system.
Everyday Utility
For owners who occasionally need additional cargo capacity, a receiver hitch can make the Mazda CX-5 more versatile without permanently attaching a large exterior carrier.
Explore additional towing accessories, trailer hitches, and automotive parts at Pro Street Online.
Class III 2-Inch Hitch vs. 1.25-Inch Receiver
| Feature | This 2-Inch Class III Hitch | Typical 1.25-Inch Hitch |
|---|---|---|
| Receiver opening | 2 inches | 1.25 inches |
| Accessory selection | Broad | More limited |
| Heavy-duty bike rack options | Often available | Model dependent |
| Cargo carrier options | Broad | Model dependent |
| Hitch rating | 4,000 lb GTW advertised | Varies |
| Tongue rating | 600 lb advertised | Varies |
| Vehicle towing limit | Determined by Mazda | Determined by Mazda |
A larger receiver can improve accessory compatibility, but it does not increase the vehicle’s factory towing rating.
How to Install the Mazda CX-5 Class III Trailer Hitch
This hitch uses a bolt-on design intended for compatible factory mounting points.
-
Prepare the vehicle. Park on level ground, engage the parking brake, and allow exhaust components to cool.
-
Review the installation instructions. Identify the correct mounting locations, fasteners, and any required exhaust or trim clearance procedures.
-
Inspect the mounting points. Check for corrosion, damaged threads, or obstructions before positioning the hitch.
-
Position the receiver assembly. Support the hitch securely and align it with the specified vehicle mounting points.
-
Install the supplied hardware. Start all fasteners by hand to prevent cross-threading.
-
Torque the mounting bolts. The supplied description specifies 86 ft-lbs for M12 hardware. Confirm this value against the exact installation instructions before tightening.
-
Check clearances. Verify that the hitch does not interfere with exhaust components, suspension movement, bumper trim, or other vehicle equipment.
-
Inspect the finished installation. Confirm proper hardware seating and follow the manufacturer’s reinspection instructions.
A second person or suitable support equipment may be helpful when positioning the hitch beneath the vehicle.
Important Mazda CX-5 Towing Capacity Considerations
The hitch manufacturer’s advertised 4,000 lb rating is not a substitute for Mazda’s vehicle towing specifications.
Before towing, determine the limits for your exact CX-5 model year, engine, drivetrain, and market.
Also consider:
-
Maximum loaded trailer weight.
-
Maximum permitted tongue weight.
-
Trailer brake requirements.
-
Correct hitch ball and ball mount ratings.
-
Trailer lighting connections.
-
Tire pressure and vehicle loading.
-
Passenger and cargo weight.
-
Applicable state towing regulations.
If the vehicle’s towing limit is lower than the hitch rating, the vehicle limit controls.
For bike racks and cargo carriers, confirm that the loaded accessory does not exceed the vehicle’s allowable tongue load or any manufacturer-imposed accessory restrictions.
Frequently Asked Questions
Does this hitch fit a 2025 Mazda CX-5?
The manufacturer advertises compatibility with gasoline-powered 2013–2025 Mazda CX-5 models. Verify the exact application before ordering.
Will this hitch fit a 2016 Mazda CX-5?
Yes, the supplied fitment range includes gasoline-powered 2016 Mazda CX-5 models, subject to configuration verification.
Does it fit diesel Mazda CX-5 models?
No. The manufacturer explicitly excludes diesel-equipped CX-5 models.
What size receiver does this hitch have?
It features a standard 2-inch square receiver opening.
Can this hitch tow 4,000 pounds?
The hitch assembly is advertised with a 4,000 lb GTW rating, but the Mazda CX-5’s towing capacity may be lower. Never exceed the vehicle manufacturer’s limits.
What is the tongue weight rating?
The manufacturer advertises a 600 lb hitch tongue weight rating. The vehicle’s allowable tongue load may be lower.
Can I install a bike rack?
Yes, a compatible 2-inch bike rack may be used within the vehicle, hitch, and accessory manufacturer’s weight and clearance limits.
Does installation require welding?
No. The manufacturer describes the hitch as a bolt-on installation.
Does this hitch include trailer wiring?
The supplied product description does not confirm a trailer wiring harness. Trailer wiring may need to be purchased separately.
What torque should I use for the mounting bolts?
The seller specifies 86 ft-lbs for M12 hardware. Verify that this applies to the exact supplied fasteners and hitch installation instructions.
Upgrade Your Mazda CX-5 with a Versatile 2-Inch Receiver Hitch
The Class III Trailer Hitch for 2013–2025 Mazda CX-5 provides a convenient way to add compatible towing and cargo-carrying accessories to your SUV.
Featuring Q235B steel construction, a standard 2-inch receiver, corrosion-resistant black finish, and vehicle-specific bolt-on installation, this hitch is designed for owners who want additional utility from their CX-5.
Its advertised 4,000 lb gross trailer weight and 600 lb tongue weight ratings provide the hitch’s component specifications, while actual towing and accessory loads remain subject to Mazda’s vehicle limits.
Whether you’re installing a bike rack, mounting a cargo carrier, or preparing for light-duty towing, this receiver hitch offers a practical foundation for your setup.
Upgrade your Mazda CX-5 with a Class III 2-Inch Trailer Hitch and expand your SUV’s hauling versatility.
There are no reviews yet.