Vitog 3.6L V6 Valve Cover Gasket Set – Stop Oil Leaks Before They Become Expensive Repairs

Vehicle Compatibility and Fitment

The Vitog VS50805R gasket set is advertised for select Chrysler Pentastar 3.6L V6 applications, with additional 3.2L applications listed. Verify your engine, production year, and individual gasket part numbers before ordering.

Fitment warning: Not every model year or trim listed above uses the same engine or gasket configuration. The Cherokee 3.2L application requires particular attention, and the 2017 Chrysler 200 listing should be verified because North American production ended in 2016. Confirm compatibility using your VIN and original equipment part numbers.

Replacement and Reference Part Numbers

VS50805R, 5184596AE, MS-97204, MS19879, 5184331AC, MS97205, MS19878, 5184562AC, 05184595AE.

These are supplier-provided cross-reference numbers for components in the kit and should not be interpreted as interchangeable numbers for every gasket.

Signs Your Valve Cover Gaskets Need Replacement

A failing valve cover gasket often develops gradually, making the symptoms easy to overlook until oil begins accumulating around the engine.

Common warning signs include:

1. Oil collecting around the valve cover perimeter.

2. Burning oil odors after driving or while idling.

3. Visible oil residue on the cylinder head or nearby components.

4. Oil contamination inside spark plug wells.

5. Smoke from the engine compartment when leaked oil contacts hot exhaust components.

6. Increasing oil consumption caused by an external leak.

These symptoms can also originate from other problems, including the oil filter housing, PCV system, or other engine seals. Proper diagnosis is important before replacing parts.

Built for DIY Mechanics and Professional Repairs

Replacing valve cover gaskets on a Pentastar V6 can require removing intake components, disconnecting electrical connectors, and carefully cleaning the cylinder head sealing surfaces.

The Vitog gasket assortment is intended to simplify parts preparation by providing multiple replacement seals for the job.

During installation, follow the factory service procedure, observe the correct tightening sequence and torque specifications, and apply RTV sealant only where specified by the manufacturer.

Important: Gaskets don’t fix cracked valve covers, warped sealing surfaces, or oil leaks originating elsewhere. Correct diagnosis and installation are essential for a lasting repair.

Valve Cover Gasket FAQs

Can a bad valve cover gasket cause a misfire?

Yes. Oil leaking into spark plug wells can contaminate ignition coil boots and cause electrical tracking, potentially resulting in misfires.

Will replacing the valve cover gasket stop a burning oil smell?

If the smell is caused by oil escaping through the valve cover gasket and contacting hot exhaust components, replacing the failed seal and cleaning the oil residue should address the source.

Is a valve cover gasket the same as a head gasket?

No. The valve cover gasket seals the upper cylinder head cover. The head gasket seals the joint between the cylinder head and engine block.

Can I drive with a leaking valve cover gasket?

A minor seep may allow limited driving while arranging repairs, provided the oil level remains safe and oil isn’t reaching hazardous components. Significant leaks, smoke, or oil-pressure warnings require immediate attention.

FAQ and How-To Resources from My Pro Street

These verified, live articles help customers diagnose engine oil leaks and understand related repair procedures:

Restore Your Engine’s Seal Before a Small Leak Becomes a Big Problem

Don’t let an aging gasket turn your engine compartment into an oil-soaked mess. The Vitog VS50805R Valve Cover and Intake Manifold Gasket Set offers a practical, comprehensive sealing solution for compatible Chrysler, Dodge, Jeep, and Ram V6 engines.

Shop replacement engine gaskets and maintenance parts at Pro Street Online. Confirm exact fitment and kit contents before purchasing.