3.6L Pentastar Valve Cover Gasket & Intake Manifold Gasket Kit for Jeep, Dodge, Chrysler & Ram

Vehicle Compatibility and Fitment

This valve cover and intake manifold gasket kit is advertised for the following applications.

Fitment Notice: These are supplier-advertised applications. Gasket designs may differ between engine generations and model years. Verify the vehicle’s engine configuration, VIN, and original gasket part numbers before purchasing. The Jeep Cherokee application uses the 3.2L Pentastar V6 rather than the 3.6L.

What’s Included in the Gasket Kit?

This combination is especially useful when the repair requires removing intake components to access the valve covers. Replacing disturbed intake manifold seals during reassembly can help reduce the risk of unwanted air leaks.

High-Quality Rubber Gaskets for Dependable Engine Sealing

Valve cover gaskets operate under demanding conditions. Constant temperature fluctuations, engine vibration, and exposure to lubricating oil can gradually reduce the flexibility of aging rubber seals.

This replacement gasket kit uses durable rubber materials designed to maintain sealing contact under normal engine operating conditions.

Properly installed gaskets help prevent oil from escaping around the valve cover perimeter while supporting a secure seal at the intake manifold connections.

The result is a practical repair solution for maintaining engine cleanliness and reducing leaks caused by deteriorated gaskets.

Common Symptoms of Failing Pentastar Valve Cover Gaskets

Recognizing the symptoms of a worn valve cover gasket can help prevent unnecessary engine maintenance problems.

Common warning signs include:

• Visible Engine Oil Leaks: Oil accumulating around the valve cover or running down the cylinder head.

• Burning Oil Smell: Oil contacting hot exhaust components can produce an unpleasant odor.

• Oil Residue Around Ignition Components: Depending on the leak location, oil may collect near ignition coils and related wiring.

• Low Engine Oil Levels: Continued external leakage can contribute to gradual oil loss.

• Engine Compartment Contamination: Escaping oil attracts dirt and grime, making future leak diagnosis more difficult.

Intake manifold gasket problems may also cause rough idle, vacuum leaks, or lean-condition diagnostic trouble codes when air enters the engine through an improperly sealed intake connection.

Before replacing the valve cover gaskets, inspect the oil cooler and oil filter housing assembly as well. These are separate potential leak sources on Pentastar engines, and replacing valve cover gaskets will not correct an unrelated oil cooler leak.

Designed for Jeep Wrangler, Dodge Charger, Ram 1500 and More

This gasket kit supports maintenance on a wide range of Pentastar-powered vehicles.

For Jeep Wrangler owners, replacing deteriorated valve cover seals helps address oil leaks that may develop after years of driving and repeated engine heat cycles.

Dodge Charger and Challenger owners can use the kit during compatible 3.6L V6 engine repairs requiring valve cover or intake manifold removal.

For Ram 1500 and ProMaster applications, proper engine sealing is equally important for reducing oil loss and keeping surrounding components clean.

Regardless of the vehicle, matching the gasket kit to the correct engine configuration remains essential for a successful repair.

Installation Tips for Pentastar Valve Cover Gaskets

Successful gasket replacement requires careful preparation and attention to the manufacturer’s service procedures.

Begin by removing the components necessary to access the valve covers. On many Pentastar applications, this involves disconnecting intake plumbing, electrical connections, and related hardware.

Once the valve covers are removed, clean the sealing surfaces carefully and inspect the covers for cracks or distortion.

Install the replacement gaskets and grommets in their intended locations, making sure each component is fully seated.

When reinstalling the intake manifold, replace the appropriate upper and lower seals and ensure that no old gasket material remains on the mating surfaces.

Follow the factory tightening sequence and torque specifications for the specific engine. Avoid overtightening fasteners or applying excess RTV sealant, which can compromise gasket sealing.

After completing the repair, inspect for external oil leaks and check for intake air leaks or abnormal engine operation.

Replacement and Reference Part Numbers

This gasket kit is advertised with the following part number references:

VS50805R, 5184596AE, 5184331AC, MS97205, MS19878, 5184562AC, 05184595AE, MS97204, MS19879.

These numbers identify related gasket sets and individual sealing components. They should not all be treated as interchangeable complete-kit part numbers.

Confirm component compatibility with the specific engine before ordering.

Why Choose This 3.6L Pentastar Gasket Kit?

Purchasing a combined valve cover and intake manifold gasket kit can simplify engine maintenance when multiple sealing components need replacement.

Instead of sourcing individual valve cover and intake manifold gaskets separately, this 26-piece kit provides the listed components in one package.

Its durable rubber construction and application-focused design make it a practical option for repairing external oil leaks and restoring intake manifold sealing on compatible engines.

For owners performing preventative maintenance or addressing high-mileage engine leaks, replacing worn gaskets can help preserve engine cleanliness and reduce the risk of continued oil loss.

Buy 3.6L Pentastar Valve Cover & Intake Manifold Gasket Kit

Restore dependable engine sealing with this 3.6L Pentastar Valve Cover and Intake Manifold Gasket Kit for select Jeep, Dodge, Chrysler, Ram, and Volkswagen vehicles.

Featuring 26 replacement sealing components, durable rubber construction, and broad supplier-advertised vehicle compatibility, this kit offers a convenient solution for common engine gasket repairs.

Shop engine gaskets and replacement parts at Pro Street Online and keep your Pentastar V6 properly maintained.

Related Engine Repair and Maintenance Guides

For customers diagnosing Pentastar engine oil leaks, these live articles from My Pro Street Online provide useful information:

• Why Is My Car Leaking Oil? — Identify valve cover leaks and distinguish them from oil cooler, timing cover, and other engine leaks.

• Burning Oil Smell From a Car — Learn why leaking engine oil can produce smoke or burning odors.

• Engine Oil Sludge Causes and How to Fix It — Understand sludge accumulation and preventative engine maintenance.