Termitor H11 9005 LED Bulb Combo – 220,000LM, 6500K, 4 Pack

Advertised 220,000-Lumen Output

The product title advertises 220,000 lumens, while the supplied feature description lists 190,000 lumens. It also describes the bulbs as both 2,200% and 1,500% brighter than standard halogen lighting.

Because the listing contains conflicting figures, these numbers should be presented as manufacturer claims rather than verified output. Termitor also sells visually similar 9005/H11 kits advertised at 100,000, 140,000, and 150,000 lumens, making the exact model and packaging especially important.

Whatever number is printed on the box, usable illumination still depends on beam placement, housing design, voltage, lens clarity, and alignment. Lumens scattered above the road are mostly an expensive way to illuminate road signs, tree branches, and annoyed motorists.

6500K Cool-White Light

The 6500K color temperature creates a bright white appearance with a mild blue tint. Matching bulbs provide consistent color across the high- and low-beam positions.

Cool-white lighting can improve perceived contrast in dry conditions, but it may create more reflected glare in rain, snow, or fog than warmer halogen light. Read our LED headlight bulb buying guide for additional guidance.

Optimized LED Placement

Termitor states that the 48-chip configuration recreates the position of a halogen filament to provide:

• A defined beam pattern
• Improved distance illumination
• Reduced dark spots
• More even road coverage
• Lower glare above the cutoff

Actual performance depends on the original reflector or projector. No universal replacement bulb can guarantee the correct cutoff in every housing.

Test the lights against a wall after installation. If the low-beam pattern is scattered or significantly higher than stock, do not assume other drivers will appreciate the extra brightness.

Real 1:1 Halogen-Size Design

The compact bulb body is designed to fit factory sockets without separate adapters, external driver boxes, or housing modifications. This can simplify installation in vehicles with restricted space behind the headlamp.

Installation Procedure

1. Switch off the lights and allow the halogen bulbs to cool.
2. Remove the original 9005 and H11-family bulbs.
3. Match each Termitor bulb to the correct socket.
4. Lock the bulbs securely into the housings.
5. Connect the factory wiring plugs.
6. Check cooling-fan and dust-cover clearance.
7. Test high- and low-beam operation.
8. Check for flickering or dashboard warnings.
9. Inspect and adjust the beam pattern.

Read How to Upgrade Headlights the Right Way before converting an original halogen system.

Active Cooling System

High-speed fans and aviation-grade aluminum housings transfer heat away from the LED chips. Termitor claims the cooling design supports more than 80,000 operating hours, described in the title as approximately ten years of service.

Actual lifespan depends on:

• Daily operating time
• Fan condition
• Housing ventilation
• Electrical-system voltage
• Environmental temperature
• Dust and moisture exposure
• Available space around the heat sink

An 80,000-hour rating would equal more than nine years of continuous operation, so the ten-year statement is possible mathematically—but only under ideal conditions and with the lights apparently never taking a day off.

IP68 Weather Protection

The advertised IP68 rating indicates protection against dust and water intrusion at the bulb assembly. It does not waterproof the complete headlight housing or repair damaged seals, vents, or dust covers.

Make sure every gasket seats correctly and reinstall the original housing covers whenever clearance permits.

Vehicle Compatibility

Termitor claims compatibility with approximately 99% of applicable vehicles. Some computer-monitored lighting systems may still require:

• CANbus decoders
• Anti-flicker modules
• Load resistors
• Bulb-retaining adapters
• Larger replacement dust covers

Confirm the physical bulb size and electrical behavior before completing installation. Compatibility percentages are estimates; your body-control module did not participate in the marketing meeting.

Specifications

Road-Use Notice

Confirm local regulations before installing LED bulbs into road-going headlamps. NHTSA has stated that LED replacement light sources are not currently permitted as replacements in headlamps originally designed around regulated halogen sources. Fog-light and off-road applications may be subject to different requirements.

After installation, use our headlight aiming procedure to check vertical and horizontal alignment.