WSDCAM 113dB Anti-Theft Vibration Alarm with Remote – 2 Pack

Up to 113dB Alarm

The WSDCAM alarm can produce an audible warning of up to 113dB.

That’s loud enough to make the alarm useful as an active deterrent rather than simply a visual warning.

When sufficient vibration is detected, the alarm can respond audibly to:

• Tampering
• Movement
• Shaking
• Impact
• Unauthorized handling

The goal isn’t to make the object impossible to steal.

It’s to make stealing it substantially more awkward.

Thieves generally prefer fewer people looking at them.

A 113dB alarm does not specialize in subtlety.

7 Adjustable Sensitivity Levels

One of the most useful WSDCAM features is 7-level adjustable vibration sensitivity.

This lets you change how easily the alarm reacts.

At higher sensitivity, relatively small disturbances can trigger the sensor.

At lower sensitivity, more significant movement is required.

That’s useful because a motorcycle parked inside a garage has very different environmental vibration than a trailer parked beside a busy road.

Higher Sensitivity

Useful for:

• E-bikes
• Bicycles
• Indoor storage
• Garage doors
• Toolboxes
• Quiet parking areas

Lower Sensitivity

Useful for:

• Motorcycles parked near traffic
• Trailers
• Cars
• Outdoor equipment
• Busy parking areas

The correct setting depends on the installation.

3 Adjustable Volume Levels

Unlike many standalone alarms that give you one option—

LOUD

—the WSDCAM provides three adjustable volume levels.

This gives you more control over how aggressively the alarm responds.

Maximum volume makes sense when the alarm is being used primarily for outdoor theft deterrence.

A lower setting may be more appropriate for:

• Garage use
• Indoor equipment
• Luggage
• Doors
• Windows
• Areas where maximum output isn’t necessary

You don’t necessarily need 113dB every time somebody bumps the garage door.

Although admittedly, the garage door would probably learn its lesson.

Wireless Remote Control

The WSDCAM alarm includes wireless remote operation.

That allows you to manage the alarm without physically touching the sensor every time.

Depending on the selected function, the remote can be used for alarm control and vehicle-search functionality.

This makes the alarm significantly more convenient when mounted:

• Under a motorcycle seat
• On a bicycle
• Inside a trailer
• Near a garage door
• On equipment
• In a concealed vehicle location

Up to 328-Foot Remote Range

WSDCAM advertises wireless remote operation at distances of up to approximately:

328 feet / 100 meters

under favorable conditions.

Actual operating range can be reduced by:

• Buildings
• Walls
• Vehicles
• Metal structures
• Radio interference
• Battery condition
• Installation location

Treat the 328-foot figure as a maximum advertised range rather than a guaranteed real-world distance.

Vehicle Search Function

The remote also provides a vehicle-search or remote sound function.

If you’re trying to locate your motorcycle, bicycle or other protected vehicle in a parking area, you can activate an audible response.

It’s basically the security-device version of:

“Where did I park this thing?”

For motorcycles and e-bikes in crowded parking areas, that can be surprisingly useful.

Three Selectable Bell Sounds

WSDCAM provides three selectable bell/alarm sounds.

That gives you some control over the audible response rather than forcing every function to use the exact same sound.

This can also make it easier to recognize your alarm when several vehicles or devices are nearby.

SOS Emergency Function

One unusual feature of the WSDCAM alarm is its SOS function.

Using motion detection and internal sensing logic, the alarm is designed to recognize certain fall-type events and produce an audible emergency warning.

This feature may be particularly relevant for:

• Cyclists
• E-bike riders
• Motorcycle riders

The SOS function can be turned on or off.

Important SOS Limitation

The WSDCAM alarm should not be considered a substitute for:

• Emergency communication device
• Medical alert system
• Smartphone crash detection
• Satellite emergency communicator
• Dedicated motorcycle emergency system

The alarm can make noise.

It does not automatically mean emergency services are being contacted.

Treat the SOS feature as an additional local audible alert—not a life-safety communications system.

IP65 Weather Resistance

The WSDCAM alarm is rated IP65.

That makes it suitable for many outdoor installations where it may encounter:

• Rain
• Dust
• Road spray
• Outdoor moisture

IP65 does not mean the alarm is designed for prolonged underwater submersion.

Mount it intelligently and avoid locations where water can continuously collect around the housing.

Great for Motorcycles

Motorcycles are one of the most obvious applications for this alarm.

A motorcycle can be:

• Pushed
• Rolled
• Lifted
• Loaded into a truck

without the engine ever starting.

A vibration alarm provides another detection layer independent of the motorcycle’s ignition system.

If someone begins physically disturbing the bike, the sensor can respond.

For stronger motorcycle security, combine the WSDCAM alarm with:

• Disc lock
• Heavy chain
• Ground anchor
• Factory immobilizer
• GPS tracker

Different layers solve different parts of the theft problem.

Great for E-Bikes

E-bike theft is another strong application.

The standalone design means you don’t need to integrate the alarm into the bicycle’s electrical system.

Mount it securely, adjust the sensitivity and use it as another deterrent alongside a quality physical lock.

This is particularly useful because the alarm can remain independent of the e-bike’s main drive battery and electronics, depending on the exact WSDCAM configuration.

Bicycle Security

Traditional bicycles can benefit as well.

The vibration sensor can react when someone:

• Moves the bike
• Tampers with it
• Attempts to remove components
• Begins manipulating the lock

It does not replace a physical bicycle lock.

Use both.

The physical lock makes the bicycle difficult to remove.

The alarm makes quietly working on that lock considerably more difficult.

Trailer Security

Trailers are another excellent application because they often sit unattended for long periods.

The WSDCAM alarm can add local vibration detection to:

• Utility trailers
• Enclosed trailers
• Motorcycle trailers
• Small cargo trailers
• Equipment trailers

For serious trailer protection, pair the vibration alarm with:

• Coupler lock
• Wheel lock
• GPS tracker

Again:

Layers.

Car Security

The WSDCAM can also provide an additional security layer for a car.

It does not need to replace the vehicle’s existing factory alarm.

Instead, it can operate independently as another vibration-sensitive audible deterrent.

This can be useful on:

• Older cars
• Project cars
• Classic cars
• Vehicles without factory alarms
• Cars with valuable aftermarket equipment

For a deeper look at how these security layers work together, read our Car Alarms That Protect Your Build, Not Just Noise guide.

Golf Cart Security

Golf carts are another practical application.

They can be relatively easy to move and may spend significant time parked outside.

A standalone vibration alarm provides additional audible security without requiring integration into the golf cart’s existing wiring system.

Mailbox Alarm

Yes.

WSDCAM also markets the alarm for mailboxes.

Attach it appropriately and the vibration sensor can respond when the protected object is disturbed.

That can make it useful for monitoring:

• Mailboxes
• Storage boxes
• Outdoor cabinets
• Equipment cases

Sensitivity will need to be adjusted appropriately for the application.

Door & Window Security

The alarm can also be mounted to certain doors or windows.

That turns physical movement or vibration into an audible warning without requiring a complete hardwired home-security system.

Potential applications include:

• Garage doors
• Shed doors
• Storage-room doors
• Windows
• Gates

Again, this is a local audible alarm.

It does not provide professional security monitoring.

Luggage & Equipment

Because the WSDCAM is self-contained, it can also provide additional security for:

• Luggage
• Toolboxes
• Equipment cases
• Storage containers

Just make sure the alarm is securely mounted and sensitivity is appropriate for the environment.

Easy Installation

Installation does not require complicated wiring.

The alarm can be mounted using:

• Double-sided adhesive
• Strap mounting

depending on the installation.

A typical setup is straightforward:

1. Choose a mounting location.
2. Clean the mounting surface.
3. Secure the alarm.
4. Test remote operation.
5. Set the desired volume.
6. Set vibration sensitivity.
7. Test the alarm.
8. Adjust as necessary.

Choose the Mounting Location Carefully

The alarm should be mounted where it can detect meaningful vibration without being constantly triggered by normal operation.

Avoid mounting where the device can interfere with:

• Steering
• Brakes
• Pedals
• Suspension
• Wheels
• Chains
• Belts
• Hot exhaust components
• Engine components
• Driver controls

On motorcycles and bicycles, make sure the alarm cannot fall into moving components.

No Complicated Vehicle Wiring

The WSDCAM’s standalone architecture is one of its biggest advantages.

You do not need to splice into:

• Starter circuit
• Ignition
• Door triggers
• CAN bus
• Factory immobilizer
• Parking lights
• OBD-II port

That makes installation significantly easier than a traditional automotive security system.

Is WSDCAM a Complete Car Alarm System?

No.

This is better described as a standalone wireless vibration alarm.

It provides:

• Vibration detection
• Audible alarm
• Remote control
• Adjustable sensitivity
• Adjustable volume

It does not provide the deep vehicle integration of a conventional aftermarket alarm.

Does WSDCAM Have Starter Kill?

No starter-interrupt capability is specified.

The alarm does not prevent the engine from starting.

Does WSDCAM Have GPS?

No.

It does not provide:

• GPS location
• Vehicle tracking
• Map location
• Trip history
• Theft-recovery coordinates

Pair it with a GPS tracker if remote vehicle location is important.

Does It Send Smartphone Alerts?

No smartphone connectivity is specified for this standalone alarm.

The remote controls the alarm locally.

Does It Have Remote Start?

No.

The WSDCAM remote operates the alarm functions.

It does not remotely start a vehicle engine.

Does It Unlock Car Doors?

No factory keyless-entry integration is specified.

The alarm remote should not be confused with a vehicle key fob.

WSDCAM vs. Generic 113dB Vibration Alarm

You already have a generic 113dB vibration-alarm category option.

The WSDCAM has several specific features that distinguish it.

WSDCAM 113dB 2-Pack

• WSDCAM branded
• Two alarms
• Up to 113dB
• 7 sensitivity levels
• 3 volume levels
• Up to 328-ft advertised remote range
• 3 bell sounds
• Vehicle-search function
• SOS function
• IP65 rating

Generic 113dB Alarm

• Up to 113dB
• Adjustable sensitivity
• Remote
• Standalone installation
• IP rating depends on exact product
• Fewer specifically documented adjustment features

That gives WSDCAM a much more feature-specific search target.

WSDCAM vs. Full Wired Car Alarm

WSDCAM

Best for:

• Simple installation
• Bikes
• Motorcycles
• Trailers
• Equipment
• Additional vehicle security
• No complicated wiring

Traditional Car Alarm

Better for:

• Door monitoring
• Hood/trunk triggers
• Ignition monitoring
• Starter kill
• Keyless entry
• Multiple wired sensors
• 2-way remote systems
• Remote start

They’re solving different problems.

WSDCAM vs. GPS Tracker

A vibration alarm tells people nearby:

Someone is messing with this.

A GPS tracker can tell you:

Someone stole it, and now it’s three miles away.

For valuable motorcycles, e-bikes and trailers, using both can provide a much stronger security strategy.

Product Specifications

Brand: WSDCAM
Product Type: Standalone Anti-Theft Vibration Alarm
Package Quantity: 2 Alarm Units
Maximum Alarm Output: Up to 113dB
Vibration Detection: Yes
Motion Detection: Yes
Sensitivity Levels: 7
Volume Levels: 3
Alarm/Bell Sounds: 3
Remote Control: Yes
Advertised Remote Range: Up to 328 ft / 100 m
Vehicle Search Function: Yes
SOS Function: Yes, can be enabled/disabled
Weather Resistance: IP65
Installation: Adhesive or strap mounting
Complex Vehicle Wiring: Not required
GPS: No
Smartphone App: No specified support
Remote Start: No
Starter Kill: No
Keyless Entry: No
Primary Applications: Bikes, e-bikes, motorcycles, scooters, cars, trailers, golf carts, doors, windows, mailboxes and equipment

Frequently Asked Questions

How loud is the WSDCAM alarm?

The alarm is rated at up to 113dB.

How many alarms are included?

This configuration contains two alarm units.

How far does the WSDCAM remote work?

WSDCAM advertises remote range up to approximately 328 feet / 100 meters under suitable conditions.

Can I adjust the sensitivity?

Yes. The WSDCAM provides 7 adjustable sensitivity levels.

Can I adjust the alarm volume?

Yes. It provides 3 adjustable volume levels.

Is the WSDCAM alarm waterproof?

It carries an IP65 weather-resistance rating. It is suitable for outdoor exposure but should not be submerged.

Can I use it on an electric bike?

Yes. E-bikes are one of the primary intended applications.

Can I use it on a motorcycle?

Yes.

Can I use it on a trailer?

Yes. It can provide an additional vibration-sensitive security layer for trailers.

Can I use it on a car?

Yes. It can operate as a standalone additional alarm without integrating into the vehicle’s electrical security system.

Can I put it on a garage door?

Yes, provided it is securely mounted and the sensitivity is appropriately adjusted.

What does the SOS function do?

The alarm uses motion sensing to identify certain fall-type events and can produce an audible SOS warning. The function can be enabled or disabled.

Does SOS contact emergency services?

No such emergency communication capability is specified. Treat SOS as a local audible warning rather than an emergency-response service.

Does WSDCAM have GPS tracking?

No.

Does it send alerts to my phone?

No smartphone alert capability is specified.

Does it disable the engine?

No.

Does it remotely start my car?

No.

Does it control my vehicle’s locks?

No factory keyless-entry integration is specified.

Does installation require wiring?

No complicated vehicle wiring is required.

Two Little Boxes That Really Hate Being Shaken

The WSDCAM alarm isn’t trying to replace a $500 professionally installed vehicle-security system.

That’s actually part of its appeal.

Stick it somewhere appropriate.

Set the sensitivity.

Arm it.

And if somebody starts messing with your bike, motorcycle, trailer or other property:

113 decibels enters the conversation.

The combination of 7 sensitivity settings, 3 volume levels, 328-foot advertised remote range, IP65 construction, SOS functionality and two alarms per package makes this considerably more versatile than a basic one-setting vibration alarm.

For motorcycles, e-bikes, trailers and project cars, it can provide a useful additional layer of security without cutting a single factory wire.