Specification	Details
Brand	Veepeak
Model	OBDCheck BLE+ / BLE+ Plus
Product Type	Bluetooth OBD-II adapter
Hardware	ELM327 v2.2, per Veepeak
Wireless	Bluetooth Low Energy + Classic Bluetooth
iPhone / iPad	Yes
Android	Yes
Windows	Supported
Mac	Supported
Operating Voltage	9V–16V
Max Operating Current	45 mA
Generic DTC Reading	Yes
Code Clearing	Yes
Freeze Frame	Yes
I/M Readiness	Yes
Live Data	Yes
App Included	No
Oil Reset	No
EPB Reset	No
Adaptations	No
Relearning	No
MS-CAN	No
SW-CAN	No

Read Check Engine Light Codes

For most buyers, the core purpose of the Veepeak OBDCheck BLE+ is standard OBD-II diagnosis.

Using a compatible app, the adapter can retrieve supported:

Stored engine DTCs
Pending DTCs
Freeze-frame information
Emissions readiness data
Live ECU parameters

Common trouble codes may include:

P0171 — System Too Lean
P0300 — Random/Multiple Cylinder Misfire
P0301–P0308 — Cylinder-Specific Misfire
P0420 — Catalyst Efficiency Below Threshold
P0440-series — EVAP faults
P0507 — Idle Speed Higher Than Expected
P0700 — Transmission Control System Malfunction notification

After retrieving a code, continue your diagnosis with the Pro Street DTC Doctor:

https://my.prostreetonline.com/dtc-obdii/

Complete P-Code library:

https://my.prostreetonline.com/dtc-doctor/p-code-obd-ii-codes/

Clear Supported Check Engine Codes

Compatible apps can use the Veepeak adapter to request clearing of supported generic OBD-II engine trouble codes.

That may also switch off the:

Check Engine Light / MIL

after the problem has been repaired.

However:

Clearing a code does not repair the underlying problem.

If the fault remains, the ECU can detect it again and the code may return.

The proper process is:

Read the DTC.
Record freeze-frame information.
Review live data.
Diagnose the problem.
Repair the vehicle.
Clear the fault.
Verify that it does not return.

Live OBD-II Data

The Veepeak OBDCheck BLE+ can stream supported real-time ECU information through compatible applications.

Depending on the vehicle and app, that can include:

Engine RPM
Vehicle speed
Coolant temperature
Intake-air temperature
Engine load
Throttle position
Fuel trims
Oxygen-sensor data
MAF readings
MAP readings
Ignition timing
Fuel-system status
Engine oil temperature
Exhaust-gas temperature
Boost pressure

Available PIDs depend on what the vehicle manufacturer exposes through the diagnostic system.

Freeze-Frame Data

Freeze-frame information captures selected operating conditions around the time an emissions-related trouble code was stored.

Depending on the vehicle, this can include:

RPM
Speed
Coolant temperature
Engine load
Fuel trim
Throttle position

That can help answer an important diagnostic question:

What was the engine doing when the fault occurred?

I/M Readiness for Smog Checks

The Veepeak adapter can display standard OBD-II:

Inspection / Maintenance readiness monitors.

These can include:

Catalyst
EVAP
Oxygen sensor
Misfire
Fuel system

This can help determine whether the vehicle has completed required self-tests before an emissions inspection.

For federal emissions information:

https://www.epa.gov/vehicle-and-fuel-emissions-testing

Don’t Clear Codes Immediately Before Smog

Clearing engine DTCs can reset readiness monitors to:

Not Ready.

The vehicle may need to complete one or more drive cycles before those monitors run again.

For that reason:

repair the fault first, clear codes second, drive the vehicle, then verify readiness.

Works With Car Scanner ELM OBD2

Veepeak officially recommends:

Car Scanner ELM OBD2

for many generic diagnostic applications.

Car Scanner is available for compatible iOS and Android devices and can provide:

DTC reading
Code clearing
Live data
Sensor monitoring
Custom dashboards
Vehicle-specific connection profiles

Vehicle-specific profiles can sometimes expose additional information beyond standard generic PIDs.

Works With Torque on Android

The Veepeak OBDCheck BLE+ supports:

Torque Lite and Torque Pro

on compatible Android devices.

Torque is popular with enthusiasts for:

Custom gauges
Engine monitoring
Live data
Trouble-code retrieval
Performance dashboards

Torque is primarily an Android application.

Works With OBD Fusion

Veepeak also lists:

OBD Fusion

as a compatible iOS and Android application.

Depending on the vehicle and purchased app features, OBD Fusion can support:

DTC diagnostics
Live data
Custom dashboards
Fuel economy information
Selected enhanced manufacturer diagnostics

Some enhanced diagnostic packages may require separate in-app purchases.

Other Compatible Apps

Veepeak currently lists compatibility with applications including:

Car Scanner ELM OBD2
OBD Fusion
Torque Lite / Pro
BimmerCode
BimmerLink
OBD JScan
Carista OBD
Dr. Prius
Infocar
OBD Master Pro
Track Attack

App compatibility, pricing and available features can change.

Always confirm your exact:

Vehicle
Model year
App
Desired feature

before purchasing.

No App Is Included

The Veepeak OBDCheck BLE+ is:

hardware only.

A compatible third-party app is required.

Some apps are free.

Others require:

One-time purchase
In-app purchase
Subscription

That flexibility is one of the adapter’s strengths, but it also means the scanner’s capabilities depend heavily on the application you choose.

iPhone and iPad Compatibility

The adapter supports compatible iOS devices through:

Bluetooth Low Energy.

For iPhone and iPad, do not normally pair the scanner manually in Apple’s Bluetooth settings.

Instead:

Plug the adapter into the OBD-II port.
Turn the vehicle ignition on.
Enable Bluetooth.
Open the compatible diagnostic app.
Select Bluetooth LE.
Choose the Veepeak adapter inside the application.

Android Compatibility

Android users can use either:

Bluetooth Low Energy
Classic Bluetooth

depending on the application.

For apps using Classic Bluetooth, Veepeak’s current instructions identify pairing PIN:

1234

where required.

Android Head Units

Veepeak specifically warns that:

Android vehicle head units may not always be compatible.

Compatibility can depend on the Bluetooth profiles and implementation used by the head unit.

If your goal is to use the adapter permanently with an aftermarket Android radio, verify compatibility before ordering.

Vehicle Compatibility

For generic OBD-II functionality, Veepeak currently lists compatibility beginning approximately at:

USA — 1996+
Canada — 1998+
European Union gasoline — 2001+
European Union diesel — 2004+
Australia gasoline — 2006+
Australia diesel — 2007+
Mexico — 2006+

These dates refer to generic OBD-II compatibility rather than guaranteed enhanced diagnostic functions.

OBD-II Protocol Support

Veepeak currently lists support for standard protocol families including:

SAE J1850 PWM
SAE J1850 VPW
ISO 9141-2
ISO 14230-4 KWP2000
ISO 15765-4 CAN

The adapter does not support:

MS-CAN
SW-CAN

That limitation matters for certain manufacturer-specific applications.

Enhanced Diagnostics Depend on the App

This is where Veepeak differs from a simple generic scanner.

Some compatible apps can access additional manufacturer-specific data.

Potential examples include:

ABS
SRS
Transmission
TPMS
Body control modules

However, this is not guaranteed simply because you own the Veepeak adapter.

Enhanced access depends on:

Vehicle
Model year
ECU
App
Purchased app packages

ABS Diagnostics

Certain apps may offer enhanced ABS diagnostics on supported vehicles.

That does not mean the adapter itself universally reads ABS codes.

Before purchasing specifically for ABS diagnosis, verify:

vehicle + app + adapter compatibility.

Airbag / SRS Diagnostics

The same applies to:

SRS / airbag modules.

Generic OBD-II does not standardize full SRS access.

Compatible enhanced diagnostic software may access those modules on selected vehicles.

TPMS Diagnostics

Some manufacturer-specific applications may provide access to TPMS information.

However:

TPMS access is not the same as TPMS sensor programming.

Do not market the Veepeak as a universal TPMS programming tool.

Transmission Temperature

Transmission-fluid temperature is often a:

manufacturer-specific PID.

Some compatible apps and vehicle profiles can expose it.

Others cannot.

If transmission temperature is your main reason for purchasing the adapter, confirm that your exact vehicle/app combination supports that PID.

EV and Hybrid Vehicle Data

Veepeak currently notes that some hybrid, plug-in hybrid and electric vehicles can provide useful information when paired with specialized apps.

Examples can include applications designed for:

Prius
Nissan Leaf
EV battery monitoring
PHEV diagnostics

However, EV support is not the same as conventional generic OBD-II support.

Battery:

State of health
Cell information
Temperature
Charging data

depends heavily on the vehicle and app.

Dr. Prius Compatibility

Veepeak lists compatibility with:

Dr. Prius

for supported Toyota and Lexus hybrid applications.

That can make the adapter attractive to hybrid owners who want vehicle-specific battery information.

Actual supported data depends on the vehicle and software.

BimmerCode Compatibility

The OBDCheck BLE+ can also be used with:

BimmerCode

for selected BMW and MINI applications.

However, there are important restrictions.

Veepeak currently states:

BMW/MINI vehicles before the 2008 model year are not supported through BimmerCode with this adapter.

BMW G-series support is also limited.

For supported vehicles:

https://bimmercode.app/cars/

BimmerLink Compatibility

The adapter can also work with:

BimmerLink

on selected BMW and MINI applications.

Again:

pre-2008 BMW models are not supported with this adapter through BimmerLink.

Verify your exact vehicle before purchasing.

BMW G-Series Limitation

Veepeak specifically advises that its OBDCheck BLE/BLE+ does not support all BimmerCode functions on BMW G-series vehicles.

For G-series coding, Veepeak recommends an appropriate:

ENET adapter

instead.

This is particularly important because buyers searching for “BimmerCode adapter” may otherwise assume every BMW platform works equally well.

Advanced Service Functions Are Not Supported

According to Veepeak, the OBDCheck BLE+ does not directly support functions such as:

Oil/service reset
Electronic parking brake reset
Relearning
Adaptation
Other dedicated maintenance resets

The supplied listing also correctly warns against expecting functions such as:

Injector coding
ABS bleeding
EPB service
Oil reset

This is not a bidirectional professional service tool.

Veepeak OBDCheck BLE+ vs Generic ELM327

Cheap Generic ELM327 Adapter

Usually provides:

Basic DTCs
Basic live data
Variable app compatibility
Variable Bluetooth implementation

Veepeak OBDCheck BLE+

Adds:

Bluetooth LE for iOS
Classic Bluetooth support
Broad third-party app ecosystem
Better documented compatibility
Vehicle-specific app options
BimmerCode/BimmerLink support on selected vehicles
ELM327 v2.2 hardware on the current BLE+ Plus

For enthusiasts who want flexibility, that broader app ecosystem is a major advantage.

Veepeak vs FIXD

FIXD emphasizes:

Simple explanations
Maintenance reminders
Consumer-friendly diagnostics
Proprietary app ecosystem

Veepeak emphasizes:

Third-party app freedom
Live data
Custom dashboards
Vehicle-specific software
Enthusiast diagnostics

The Veepeak is a better choice for someone who wants to select their own diagnostic app.

Veepeak vs TOPDON CarPal

TOPDON CarPal is aimed more toward:

Integrated full-system diagnostics
Service/reset functions
Guided diagnostic features

Veepeak is more of a:

high-quality communication adapter for third-party apps.

The application determines much of what the adapter can do.

Veepeak vs OBDLink CX

OBDLink CX is particularly focused on:

BMW
MINI
BimmerCode

The Veepeak BLE+ is more general-purpose.

It can work with several different applications and vehicle brands, making it attractive to users who do not want an adapter dedicated primarily to BMW coding.

Not Compatible With Every App

An OBD-II adapter should never be assumed to work with every third-party diagnostic application.

The supplied product information specifically warns against expecting compatibility with platforms such as:

Carly
MHD
xHP
ProTool
bootmod3

Check the software developer’s current supported-adapter list before purchasing for a specific application.

MS-CAN Limitation

The OBDCheck BLE+ does not support:

MS-CAN.

That can limit certain Ford/Mazda manufacturer-specific functions, especially in applications that require switching between:

HS-CAN
MS-CAN

Do not buy this adapter specifically for advanced FORScan functions without verifying compatibility first.

AlfaOBD Limitations

Certain enhanced AlfaOBD functions may require CAN capabilities beyond what the adapter provides.

Again, the safest approach is to verify the exact:

vehicle + app + function

rather than assuming app installation alone guarantees compatibility.

Live Data for Diagnostics

One of the Veepeak’s strongest uses is monitoring several parameters together.

For example, when diagnosing a lean-running condition you may compare:

Short-term fuel trim
Long-term fuel trim
MAF
RPM
MAP
O2 sensor data

If the ECU stores:

P0171

see:

https://my.prostreetonline.com/dtc-doctor/p0171-code-system-too-lean-bank-1/

Misfire Diagnosis

For P0300-series codes, live data and trouble-code information can help narrow the diagnostic path.

Possible causes include:

Spark plugs
Ignition coils
Fuel injectors
Vacuum leaks
Compression
Fuel pressure
Wiring

Do not assume a DTC directly names the failed component.

Transmission Codes

Generic transmission-related P-codes can sometimes be visible through standard OBD-II.

For example:

P0700

may indicate that the transmission controller has requested illumination of the Check Engine Light.

However, the actual manufacturer-specific transmission fault may require enhanced module access.

See:

https://my.prostreetonline.com/dtc-doctor/p0700-code-transmission-control-system-malfunction/

Can You Leave Veepeak Plugged In?

Veepeak says the BLE+ can generally remain connected for short periods if:

The battery is healthy
The vehicle is driven regularly

However, Veepeak recommends removing the device if the vehicle will sit for more than approximately a week.

That’s sensible advice.

The OBD-II port supplies constant electrical power on many vehicles.

Who Should Buy the Veepeak OBDCheck BLE+?

This adapter is an excellent fit for:

DIY mechanics
Automotive enthusiasts
iPhone users
Android users
Car Scanner users
Torque users
OBD Fusion users
BMW owners using supported BimmerCode applications
Jeep/FCA owners using compatible enhanced apps
Hybrid enthusiasts using vehicle-specific apps
Drivers who want customizable live data

Who Needs a Different Scanner?

Choose another platform if you specifically need:

Oil-service reset
EPB reset
ABS bleeding
Injector coding
ECU programming
Dedicated bidirectional control
Key programming
Guaranteed full-system coverage
BMW G-series BimmerCode support

Those functions are outside the intended scope of this adapter.

What’s Included?

Veepeak’s current BLE+ Plus package lists:

1 × OBDCheck BLE+ Plus adapter
1 × Veepeak carrying case
1 × User manual

Third-party apps are not included.

Shop Automotive Diagnostic Tools

Find more OBD-II scanners, diagnostic accessories and automotive repair products at:

https://prostreetonline.com/

Pro Street OBD-II Resources

Official Veepeak Resources

OBDCheck BLE+ Plus

https://veepeak.com/products/obdcheck-ble-plus

Veepeak OBDCheck BLE Instructions

https://veepeak.com/pages/obdcheck-ble-user-instructions

Final Take

The Veepeak OBDCheck BLE+ Bluetooth OBD2 Scanner is best understood as a flexible wireless interface rather than a scanner tied to one proprietary application.

Its biggest strengths are:

iPhone support

Android support

Bluetooth LE

Classic Bluetooth

Car Scanner compatibility

Torque compatibility

OBD Fusion compatibility

BimmerCode/BimmerLink compatibility on selected vehicles

and:

broad third-party app support.

That gives enthusiasts much more freedom than scanners that force you into a single application.

The tradeoff is equally important.

The Veepeak does not automatically provide every diagnostic or service function simply because an app exists.

Features such as:

ABS, SRS, transmission data, TPMS and enhanced manufacturer diagnostics

depend on the exact:

vehicle + ECU + app + adapter combination.

And dedicated functions such as:

oil reset, EPB reset, injector coding and ABS bleeding

should not be advertised as supported.

For someone who mainly wants standard OBD-II diagnostics with the flexibility to experiment with different third-party apps, the Veepeak OBDCheck BLE+ is a much stronger proposition than a mystery-brand generic ELM327 dongle.

Once you retrieve an engine code, continue troubleshooting with: