WeatherTech 441012-1-2 FloorLiners for 2017–2022 Ford Super Duty

Important Fitment Exclusions

Do not assume 441012-1-2 fits trucks equipped with:

• Regular Cab or SuperCab body
• Front bench seating
• Vinyl flooring
• A different center-console arrangement
• No rear fold-flat storage
• A rear storage system with different floor contours
• 2016 or earlier Super Duty interior
• 2023 or newer Super Duty without manufacturer verification

WeatherTech offers several closely related Super Duty liner combinations. Front seating, cab length, console type, and rear storage matter more than engine size.

Package Contents

The combined package contains three molded pieces: two front liners and one full-width rear liner.

Product Specifications

HDTE Construction

WeatherTech manufactures its traditional FloorLiner using a proprietary High-Density Tri-Extruded material. Its rigid core helps the liners retain their molded shape, while the upper surface provides texture beneath work boots and everyday footwear.

The underside creates friction against the factory carpet, and the applicable driver-side retention system helps prevent movement.

This is the traditional WeatherTech FloorLiner, not the softer FloorLiner HP. Buyers who prefer flexible, rubber-like TPE should compare it with the WeatherTech Super Duty FloorLiner HP.

High-Wall Floor Protection

The liners extend upward along the front, rear, and sides of the footwells. Molded channels move water and debris toward lower reservoir areas, helping keep contamination away from shoes and clothing.

They are designed to contain:

• Job-site mud
• Rainwater
• Snow and slush
• Road salt
• Sand and gravel
• Spilled drinks
• Everyday work-truck debris

This coverage can help preserve the Super Duty’s carpet and long-term interior condition. For more practical truck-upgrade ideas, see our truck styling trends guide.

Why Configuration Matters

Ford offered several interior layouts during this generation. Two identical-looking F-250 trucks can use different liners because one has bucket seats and fold-flat rear storage while the other has a front bench and bare rear floor.

Before ordering, check:

1. The cab has four full-size doors.
2. The floor is carpeted rather than vinyl.
3. The front row uses bucket seats.
4. The rear area has factory fold-flat underseat storage.
5. The console shape matches the product image.
6. The part number is 441012-1-2.

Our OEM replacement parts guide explains why trim and equipment checks are essential when selecting vehicle-specific components.

Installation Instructions

No drilling or adhesive should be necessary:

1. Remove all original and aftermarket floor mats.
2. Vacuum the exposed carpet.
3. Position the driver-side liner and connect its factory retention points.
4. Install the front-passenger liner.
5. Raise the rear seat and fold-flat storage system as necessary.
6. Place the one-piece rear liner across the second-row floor.
7. Return the storage system and seats to their normal positions.
8. Verify clearance around the pedals, seat tracks, storage panels, and rear-seat hardware.

Never stack these liners over existing mats. A poorly secured driver-side mat can interfere with the pedals.

Cleaning and Maintenance

Remove the liners before washing. Shake out loose material, rinse them with water, and use mild detergent for stubborn dirt.

Avoid silicone-based dressings or greasy protectants. A floor liner needs grip, not the gloss level of a freshly detailed tire.

Allow the pieces to dry before reinstalling them. Inspect the driver-side retention points and rear storage clearance whenever the liners are removed.

Frequently Asked Questions

What does WeatherTech 441012-1-2 fit?

It fits select 2017–2022 Ford F-250, F-350, F-450, and F-550 Super Duty Crew Cab trucks with the correct carpet, seating, console, and rear-storage configuration.

Does it fit a SuperCab?

The complete package uses a Crew Cab-specific second-row liner. Although the front component may fit certain SuperCab trucks, this full set should not be ordered for one without manufacturer confirmation.

Does it fit a truck with a front bench seat?

This package is commonly cataloged for front bucket-seat applications. Bench-seat trucks may require a different WeatherTech combination.

Does it fit vinyl flooring?

No. This application is designed for factory carpet. Vinyl-floor work trucks require an appropriately configured liner.

Does engine size affect fitment?

No. The 6.2-liter gas V8, 7.3-liter gas V8, and 6.7-liter Power Stroke do not determine floor-liner compatibility. Cab and interior configuration do.

Does this set work without rear fold-flat storage?

Do not assume it will. Part 4410122 is cataloged around the rear underseat fold-flat storage configuration.

Are these flexible rubber mats?

No. Traditional FloorLiners use a firmer HDTE material. FloorLiner HP is WeatherTech’s softer TPE alternative.

Can the original Ford mats stay underneath?

No. Remove the factory mats to ensure correct fit, retention, and pedal clearance.

Final Verdict

WeatherTech 441012-1-2 is a durable first- and second-row protection package for correctly configured 2017–2022 Ford Super Duty Crew Cab trucks. Its raised walls, molded drainage channels, and one-piece rear coverage make it well suited to work sites, towing duty, winter weather, and everyday use.

Confirm the cab, carpet, bucket seats, console, and rear fold-flat storage before ordering. “Super Duty” alone is not enough fitment information—not even close.