Key Features
Aluminum LED Bars (Not Plastic)
Each bar uses:
-
Anodized aluminum housing
-
Anti-flex, anti-crack construction
-
Superior heat dissipation
-
Strong resistance to rocks, road debris & weather
These are built for real roads and year-round driving.
Product description
Car Hood Led Light Strip with Flowing Water Turn Signal Light Function , Sequential White /Amber Dual Color Switchback
Neon-Style LED Glow
Unlike dotted low-end strips, OPT7 uses:
-
Dense LED arrays
-
Diffused “neon bar” effect
-
Bright, smooth undercar glow
-
Better color consistency
Clean, modern lighting with zero hot spots.

Keyless Unlock Lighting
The strips turn on automatically when:
-
You unlock your doors
-
Walk up with keyless entry
-
Approach the vehicle at night
Instantly illuminates the ground around your ride.
Specifications:
Material: Soft Silicone & LED Chips
Operating voltage: DC11-DC15V
Power : 7W-16W
Waterproof Grade: IP68
Fuse Type: 5*20-3A
Color: White / Amber Switchback
Optional length: 47inch, 59 inches,70 inches , 79 Inches (Please measure your vehicle size and choose the suitable size )
Applications: Car Hood Light Strip, Car Grill Light strip, Daytime Running Light, Engine Cover Decoration light, license plate lights, ambient light, Pedal lights,Boat Light strip .
Applicable car model: Universal Fit All type of Cars ,Trucks ,SUVs ,RVs,Pickup, Vans , campers, trailers, ATVs, Boats, Golf carts, Motorhome,travel trailer truck

Door Assist Activation
When you open a door:
-
The underglow lights automatically brighten
-
Adds visibility & style
-
Helps prevent stepping into puddles/obstacles
A surprisingly practical premium feature.
White works as daytime running light or Hood Light , You can choose to stay on steady mode or dynamic mode when driving .
Amber works as turn signal light, it acts like sequential flowing water from inside to outside to ensure everyone knows your signals.

SoundSync Music Reactive Mode
The system reacts to:
-
Bass
-
Beats
-
Rhythm
-
Voice
Transforms your underglow into a rolling light show synced to your music.

Full RGB Multicolor Modes
Using the OPT7 control box + remote you can:
-
Choose any color
-
Adjust brightness
-
Select dynamic patterns
-
Cycle effects
-
Customize glow zones
You are freely to adjust the length of amber light strip to be half length ,or same length as your headlights ,
It Synchronize with turn signal lamps .
Please refer the video from this listing for flowing modes effect .
Question & Answer :
How to find required connecting for the blue and yellow wire ?
1. Depending on car models . Mostly is like this way : take off the turn signal Wiring Harness, find out the turn signal wire by a test pencil ,the flashing one is turn signal bulb wire . splice the turn signal cable in order to sync it with led strip .
2. Yellow wire connect to Turn Signal positive at close range ( left blinker ),
Blue wire connect to Turn Signal positive at longer range( right blinker ) .
3. Red wire connect to ACC Power supply .
4. Black wire connect to negative pole or Tie lron .

Waterproof, Road-Ready Design
Rated for:
-
Rain
-
Dirt
-
Snow
-
Gravel
-
Car washes
Safe for daily driving and off-road conditions.
It Improves the style of your car, and make your car more attractive and outstanding .
Most importantly , This light will keep you driving safely even in the dark or any bad weathers .

Universal Fit for All 12V Vehicles
Ideal for:
-
Cars
-
Trucks
-
SUVs
-
Jeeps
-
Vans
-
RVs
-
Campers
-
Trailers
If it runs 12V power, the Aura kit works.
Package Includes :
1* Car Hood Light Strip
1* Standard Fuse Tap Adapters with 10Amp fuse
1* Mini Fuse Tap Adapters with 10Amp fuse
1* Test Pencil
1* Hot Melt Glue Stick
1* User Instruction
2* Cleaner Helper
We are trying our best to supply all you might need for easy installation without paying extra money .
Above accessories Meet the needs of most models BUT NOT ALL !
Should you have better advice or need further assistance ,please feel freely to reach us via inbox message ,we will answer you within 24 hour . Thank You for your Support !
Why This Kit Stands Out
-
Aluminum housing = far more durable than cheap strip lights
-
Clean neon lighting looks premium even in daylight
-
Keyless Unlock + Door Assist are unique to OPT7
-
SoundSync adds personality for meets and cruises
-
Waterproof & impact-resistant for long-term reliability
-
High brightness with smooth color diffusion
-
Universal, easy installation
You’re paying for premium build quality — and you absolutely get it.
Compatibility
Fits virtually all vehicles, including:
-
Dodge Challenger/Charger
-
Chevy Camaro/Silverado
-
Ford Mustang/F-150
-
Toyota Camry/Corolla/Tundra
-
Nissan 350Z/370Z/Altima
-
Jeep Wrangler/Gladiator
-
Honda Civic/Accord
-
RVs, campers & trailers
Universal-install underbody kit.
Installation Notes
-
Mount aluminum bars along rocker panels or frame rails
-
Keep bars clear of exhaust plumbing
-
Route wiring with included clips
-
Use the control box inside cabin or engine bay
-
Pair the remote before finalizing wiring
-
Fuse the positive lead for safety
Install time: 1–2 hours.
Final Verdict
The OPT7 Aura Aluminum Underglow Lighting Kit is one of the most durable, bright, and feature-rich underbody LED systems available.
With aluminum construction, neon-style illumination, keyless entry activation, door lighting assist, SoundSync, and waterproof reliability, it outclasses most underglow kits on the market.
If you want premium underglow with long-term durability and modern convenience features — this is the upgrade to get.































Sam –
Looked great the first 2 months then the whole right side blinker/white light stopped working altogether. Easy to install when you know what you’re looking for. Adhesive is still sticking great tho and the brightness was on point when it did workEdit: they sent a new one (free of charge) and it’s been working perfectly for the past few months, no issue. Easier to install since it was my second time, and the brightness was still on point.
Cereal killer –
I bought the led strip on July 2023 and now is October 2025 and the led strip still working like new. The led strip is surprisingly bright. Brighter than previous led strips. I already have DRL, so I did not need this to work as a DRL. I connected the led strip DRL to the low beam and it only turns on during the evening/night, that may have extended the life span compared to having the DRL turned on all the time.
W. Roney –
Fairly good looking light. As others have said, the right side wire for the turn signal could be longer. Love that there was a test light that comes with it. Helped out tremendously. The double sided tape was on both sides for some reason. Could be if once side gets messed up you just flip it over and try again? Maybe to stick the hood seals to it? No clue. Either way it’s nice to have a backup in case. Easy to switch modes, but there are only two. Also easy to change the length on the turn signal. It start from the middle which you can change to start closer to you actual signals or headlights.
Amy Bellomy –
The controller does work when it wants driving, it almost seems as if it has to “charge up” to properly blink. Blinks great when engine off and hazard lights are on. With a black truck at night and making stops this is very nice to have as it make a black truck that “disappears” in the dark visible and I don’t have to leave it running.However I have lost about a 1/4 of the LEDS on the passenger side after only 6 months, and it even looks as if a couple of the LEDs actual shorted out as it has what looks like burn marks on the inside kind of like old Christmas lights did when they blew out. I am hoping the company sees this and contacts me as I like it and I get a lot of comments about it….. :-(I have installed these they are fairly straight forward, however my control has failed. It is not utilizing the amber blink function I have checked and rechecked wiring. I know its getting the correct signals from the turn lights but yet it has quit turning on with the blinkers.I have this completely installed, and tested. It was operating “correctly” however from the start there seem to be a glitch as the turn signal would revert back to white for a second and then go again. The timing was random i.e. it would do it every 3rd blink or 4 or 3 or 6. The white light and “start up” functions are working as expected.I just need a new control module that I can wire in to replace the one that I have to assume is faulty.ThanksTom Bellomy
peter silvia –
Easy to apply to truck. Just plugs into trailer light outlets. Problem you loss trailer outlet. Won’t be a problem when pulling trailer. Just unplug and zip tie to bumper. Has been on truck for couple of months and still holding tight. Love the way it looks and is very bright.
Gabe –
I wanted to add some front DRL lighting on my car and came across these LED hood strips. I thought it would look cool on my car and it does IMO. It adds s sort of more aggressive look to the front end at night, which is cool. I don’t think it particularly made it looked “riced out”, but it could be in some people’s eyes. To me though, I think it looks nice. To each their own.It’s been probably a couple weeks since I have had these now. So it has been through rain and a lot of heat. So far, it seems to be holding up well against the weather and I hope it keeps holding up for years.The one thing I did notice that doesn’t seem to be good is that some parts of the LED strip seem to be getting more yellow versus the original more white color. For me, it is the outer parts of the LED strip while the inner part is still white. Maybe it’s because I have those parts under pressure when I close the hood on the LED strip and rubber weather stripping. Either way, it is a bit weird. It isn’t bad enough to where there is such a different it looks like the LED strip is not one piece though, so it’s still good.Overall, if you want to add a modern look to your car, this does a nice job at it. The installation process will be tedious if you haven’t worked with car wiring before, but it isn’t so difficult that you must bring it to a shop to install (definitely not worth paying someone to do this). It took me maybe an hour to get this installed the way I wanted to, but that is also because I already had my turn signals and a switched ignition source already pre-wired and ready to be tapped into from my other DRL lights. If you don’t have that done, expect to spend a couple hours in total from start to finish. It isn’t quite a cake walk. At least the end result is good.
T-M –
Magnifique
Super couleur, top
Pritpal L. –
Half light is not working
I recently purchased a LED light strip for my truck in June and after about 2 months half of the lights had already stopped working. I am very disappointed with the quality and durability of this product. It seems that the lights are not long lasting, despite the reviews I originally read before purchasing. I would not recommend this product to anyone looking for a reliable lighting solution for their vehicle.
simone lalancette –
Works perfectly fine over month
Hook these correctly and they will work just fine my truck looks like something out of a tron move and not one hiccup and I’ve got a 70”upper grill white/amber,79” lower bumper valance front spoiler white,70” rear bumper top under tailgate red and 2 24” lower bumper edge red/amber.I SAY AGAIN!!! Hook up correctly or pay someone who does
Leamer the Lemur –
Looks Awesome, But Fuse Adapters Didn’t Fit My Car
The LED light strip has a stunning appearance! My SUV’s front end is significantly brightened by it. The result is as awesome as I had imagined, and the colors are vibrant. The icing on the cake is the turn signal option. It was a little unfortunate, though, because the fuse adapters did not suit my vehicle. To guarantee a better fit, I wish I had ordered one size higher. Nevertheless, it still functions flawlessly and adds a distinctive appearance to my car with a small tweak. Overall, I’m rather pleased with the outcome; but, before making a purchase, make sure to check the adapter sizes again!