Description
Tried and true, the AEM Engine Management System is proven over years of race bred performance. Long a name associated with turbocharged performance, AEM was the first company to offer complete engine control using a race vehicles factory wiring harness and sensors.
When installing any aftermarket tuning device, check your local listings for the highest recommend dyno facility or shop. This is less of an issue when you choose AEM Engine Management System technology to power your project. Finding the best aftermarket ECU can be a challenge, which is why you should check our guide to finding the best tuner.
AEM Engine Management System
When you plug the AEM EMS in K series, you are empowering yourself for maximum flexibility and power. Dyno tuning your VTEC swap becomes infinitely easier with an AEM Engine Management System.
The Series 2 Plug & Play EMS is a culmination of this original program. It combines robust construction with our proven AEMtuner Software to deliver total engine control.
AEM’s Series 2 Plug & Play AEM Engine Management System plugs directly into a vehicle’s factory ECU harness and requires no additional wiring or hardware. Windows compatible software (XP, Vista, 7) simplifies copying, viewing and data manipulation.
AEM Engine Management System software is infinitely adjustable. It allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately deliver proper amounts of fuel and correct ignition timing, for any boost level or operating condition.
What sets the AEM EMS apart is it’s ability to autotune and adjust closed loop tuning on the fly.
AEM Engine Management System Fitment Guide
Part Number: 30-6030 – Series 2 Plug & Play EMS. Manual Trans. Acura & Honda K-Series Swap. Excluding TSX & Accord. ACURA: 02-06 RSX, 02-04 RSX Type-S. HONDA: 01-05 Civic DX/LX, 01-05 Civic EX & 02-05 Civic Si
THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION (VISIT THE EMISSIONS PAGE AT HTTP://WWW.SEMASAN.COM/EMISSIONS FOR STATE BY STATE DETAILS.
Features –
- Plugs directly into the factory harness. No rewiring necessary
- Uses all the factory sensors
- Includes start up calibrations
- System is fully enabled and unlocked – Never pay for upgrades!
- Context sensitive help eases tuning process
- Maps can be password protected by the tuner to prevent unauthorized usage or sharing
- Runs on Windows-compatible software
- Tune using new USB communication port or serial port
- Works with all AEM gauges
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS. IF THIS PRODUCT WAS PURCHASED IN ERROR, DO NOT INSTALL AND/OR USE IT. THE PURCHASER MUST ARRANGE TO RETURN THE PRODUCT(S) FOR A FULL REFUND.
THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES, HOWEVER CUSTOMERS WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.
Specifications –
- Up to 12 peak and hold injector drivers
- Up to 8 direct-fire coil outputs
- Up to 16 general-purpose outputs
- Up to 8 definable switch inputs
- Up to 4 EGT inputs with fuel trim
- 1MB of internal data logging
WARNING:
This installation is not for the tuning novice! Use this system with EXTREME caution! The AEM Series 2 Programmable EMS allows for total flexibility in engine tuning. Misuse or improper tuning of this product can destroy your engine!
If you are not well versed in engine dynamics and the tuning of engine management systems DO NOT attempt the installation.
NOTE: All supplied AEM Engine Management System calibrations, Wizards and other tuning information are offered as potential starting points only.
IT IS THE RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY CONFIRM IF THE CALIBRATION IS SAFE FOR ITS INTENDED USE.
Reviews
There are no reviews yet.